Accessing local wired LAN resources from a WiFi device
Topic
This article discusses how to configure the LAN so devices can access local wired resources over WiFi.
Environment
- Datto Network Manager
Answer
You must bridge one of your SSIDs to the LAN so your wireless clients receive an IP address from the router:
1. In Datto Network Manager, click Access Points in the Navigation menu, then choose the appropriate SSID.
Figure 1: The Navigation window
2. Click Advanced at the top of the SSID Settings page, then enable Bridge to LAN.
Figure 2: The SSID Settings page for SSID 1
3. Click the Save Changes button in the top right-hand corner of the screen, then wait for the configuration change to take effect (approximately 5 minutes).