SFP/SFP+ module hardware and specifications

Topic

This article provides the layout and hardware specifications for the Datto Small Form-factor Pluggable (SFP) and the Datto Enhanced Small Form-factor (SFP+) module line.

Ensure that your switch's firmware is newer than version 1.03.24 to avoid interruptions in device operation. See our Required Firmware Update for Datto Switches article for important information.

Environment

  • DNW-SFP-1GB-SX
  • DNW-SFP-1GB-LX
  • DNW-SFP-10GB-SR
  • DNW-SFP-10GB-LR

Description

Datto tests all Datto SFP/SFP+ modules on compatible Datto Networking Switches.

DNW-SFP-1GB-SX

Type SFP
Data Rate 1 Gbps
Wavelength 850 nm
Max. Distance/Fiber cabling Up to 550 m on 50/125 ?m (OM3/OM4) Multi-Mode Fiber
Connector Duplex LC
Operating Temperature 0 °C to 70 °C
Hot Pluggable Yes
Recommended Cable 50/125 LC to LC Multi-Mode duplex

DNW-SFP-1GB-LX

Type SFP
Data Rate 1 Gbps
Wavelength 1310 nm
Max. Distance/Fiber cabling Up to 10 km on Single-Mode Fiber
Connector Duplex LC
Operating Temperature 0 °C to 70 °C
Hot Pluggable Yes
Recommended Cable 9/125 LC to LC Single-Mode duplex

DNW-SFP-10GB-SR

Type SFP+
Data Rate 10 Gbps
Wavelength 850 nm
Max. Distance/Fiber cabling Up to 550 m on 50/125 ?m (OM3/OM4) Multi-Mode Fiber
Connector Duplex LC
Operating Temperature 0 °C to 70 °C
Hot Pluggable Yes
Recommended Cable 50/125 LC to LC Multi-Mode duplex

DNW-SFP-10GB-LR

Type SFP+
Data Rate 10 Gbps
Wavelength 1310 nm
Max. Distance/Fiber cabling Up to 10 km on Single-Mode Fiber
Connector Duplex LC
Operating Temperature 0 °C to 70 °C
Hot Pluggable Yes
Recommended Cable 9/125 LC to LC Single-Mode duplex
Datto does not currently test/verify fiber cable types or throughput over maximum distances.